How to detect sounds in IPA spellingSAMPA of a language - phones or phonemes?Which IPA sounds are similar?Are there any sources that provide accurate IPA transcriptions for Danish?how to produce pharyngeal sounds?IPA to plain simple English translatorSeeking IPA study aids (symbol memorization, audio recognition, transcription practice)Complete list of sounds in all languages (IPA)The anatomy of the L soundGeneral American English words for IPA vowel soundsAccurately representing stress

What 1968 Moog synthesizer was used in the Movie Apollo 11?

Why is implicit conversion not ambiguous for non-primitive types?

Not hide and seek

What is the purpose of using a decision tree?

What is it called when someone votes for an option that's not their first choice?

categorizing a variable turns it from insignificant to significant

Why didn't Voldemort know what Grindelwald looked like?

Is this saw blade faulty?

Why is indicated airspeed rather than ground speed used during the takeoff roll?

1 John in Luther’s Bibel

Writing in a Christian voice

A seasonal riddle

Why is "la Gestapo" feminine?

Derivative of an interpolated function

"Oh no!" in Latin

Taking the numerator and the denominator

Center page as a whole without centering each element individually

How can I, as DM, avoid the Conga Line of Death occurring when implementing some form of flanking rule?

What is the tangent at a sharp point on a curve?

Why do Radio Buttons not fill the entire outer circle?

How do I lift the insulation blower into the attic?

Strange behavior in TikZ draw command

Is divisi notation needed for brass or woodwind in an orchestra?

Make a Bowl of Alphabet Soup



How to detect sounds in IPA spelling


SAMPA of a language - phones or phonemes?Which IPA sounds are similar?Are there any sources that provide accurate IPA transcriptions for Danish?how to produce pharyngeal sounds?IPA to plain simple English translatorSeeking IPA study aids (symbol memorization, audio recognition, transcription practice)Complete list of sounds in all languages (IPA)The anatomy of the L soundGeneral American English words for IPA vowel soundsAccurately representing stress













1















First, please forgive my ignorance, I'm completely new to linguistics.



Given the IPA spelling for word, is it possible to programmatically split it into its sounds? So, for example, given the word "ingredient" and it's IPA spelling "ɪn'gridiənt", is it possible to split it into ["ɪn", "gri", "di", "ənt"]? Is there perhaps a finite list of sounds, at least in the English language, by which an IPA word can be split?



Any help appreciated










share|improve this question







New contributor




skedly is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
























    1















    First, please forgive my ignorance, I'm completely new to linguistics.



    Given the IPA spelling for word, is it possible to programmatically split it into its sounds? So, for example, given the word "ingredient" and it's IPA spelling "ɪn'gridiənt", is it possible to split it into ["ɪn", "gri", "di", "ənt"]? Is there perhaps a finite list of sounds, at least in the English language, by which an IPA word can be split?



    Any help appreciated










    share|improve this question







    New contributor




    skedly is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
    Check out our Code of Conduct.






















      1












      1








      1








      First, please forgive my ignorance, I'm completely new to linguistics.



      Given the IPA spelling for word, is it possible to programmatically split it into its sounds? So, for example, given the word "ingredient" and it's IPA spelling "ɪn'gridiənt", is it possible to split it into ["ɪn", "gri", "di", "ənt"]? Is there perhaps a finite list of sounds, at least in the English language, by which an IPA word can be split?



      Any help appreciated










      share|improve this question







      New contributor




      skedly is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.












      First, please forgive my ignorance, I'm completely new to linguistics.



      Given the IPA spelling for word, is it possible to programmatically split it into its sounds? So, for example, given the word "ingredient" and it's IPA spelling "ɪn'gridiənt", is it possible to split it into ["ɪn", "gri", "di", "ənt"]? Is there perhaps a finite list of sounds, at least in the English language, by which an IPA word can be split?



      Any help appreciated







      ipa






      share|improve this question







      New contributor




      skedly is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.











      share|improve this question







      New contributor




      skedly is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      share|improve this question




      share|improve this question






      New contributor




      skedly is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      asked 1 hour ago









      skedlyskedly

      61




      61




      New contributor




      skedly is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.





      New contributor





      skedly is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






      skedly is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.




















          1 Answer
          1






          active

          oldest

          votes


















          3














          This is, in fact, possible! It's not trivial, but it is straightforward.



          Your goal seems to be to break an English word (written in phonemic IPA) into syllables. There's a bit of controversy about how useful the concept of a "syllable" is in English, and a few different theories about what exactly a "syllable" is if it does exist, but the following is pretty widely accepted and should be good for your purpose.



          First, the theory of syllable structure: every syllable looks something like ONC, where O is the onset, N is the nucleus, and C is the coda. The nucleus is a vowel(*), and always has to be there; the onset and coda are groups of consonants, and aren't required.



          Second, the maximal onset principle: we want the onset to be as long as possible. So "tube" is /tub/, but "tuba" is /tu.ba/: the /b/ goes with the second syllable, because that makes the onset bigger.



          Third, the syllable structure constraints: certain patterns of consonants aren't allowed together. This one varies by language, but in English, the onset can only be three consonants long at most, and you can't have a stop followed by a fricative in the onset, among many others. So "axle" is /ak.səl/ instead of */a.ksəl/, despite the maximal onset principle. Wikipedia has a good list of these constrains.



          So if you want an algorithm for doing this:



          • Locate all the nuclei (vowels)

          • For each nucleus, work backward, adding sounds to the onset

          • If the onset stops being valid, take a step back, then put all the rest of the sounds in the previous syllable's coda


          (*) Some analyses of English have syllabic resonants, while others treat them as /ə/ plus resonant. In this answer I'm assuming you're using the version with schwa.






          share|improve this answer























          • What a fantastic answer. You're right, I'm trying to programatically translate a word or phrase into Aig, aka Aigy-Paigy. WordsApi provides the syllables and the IPA for a given word. I'm now considering where to insert eɪg. It might take me a while to decode and then code what you've provided but you've given me lots to go on. Thank you.

            – skedly
            1 hour ago












          • @skedly You're in luck in that case! That's even easier: find all the vowels (you can identify them on an IPA chart), then insert eɪg before each one. The only trick is figuring out whether two vowels in a row are a diphthong (should be treated as one vowel) or hiatus (should go in separate syllables). But there are only a handful of diphthongs in English, so you can just look those up in a table.

            – Draconis
            55 mins ago










          Your Answer








          StackExchange.ready(function()
          var channelOptions =
          tags: "".split(" "),
          id: "312"
          ;
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function()
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled)
          StackExchange.using("snippets", function()
          createEditor();
          );

          else
          createEditor();

          );

          function createEditor()
          StackExchange.prepareEditor(
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: false,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: null,
          bindNavPrevention: true,
          postfix: "",
          imageUploader:
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          ,
          noCode: true, onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          );



          );






          skedly is a new contributor. Be nice, and check out our Code of Conduct.









          draft saved

          draft discarded


















          StackExchange.ready(
          function ()
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2flinguistics.stackexchange.com%2fquestions%2f30933%2fhow-to-detect-sounds-in-ipa-spelling%23new-answer', 'question_page');

          );

          Post as a guest















          Required, but never shown

























          1 Answer
          1






          active

          oldest

          votes








          1 Answer
          1






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          3














          This is, in fact, possible! It's not trivial, but it is straightforward.



          Your goal seems to be to break an English word (written in phonemic IPA) into syllables. There's a bit of controversy about how useful the concept of a "syllable" is in English, and a few different theories about what exactly a "syllable" is if it does exist, but the following is pretty widely accepted and should be good for your purpose.



          First, the theory of syllable structure: every syllable looks something like ONC, where O is the onset, N is the nucleus, and C is the coda. The nucleus is a vowel(*), and always has to be there; the onset and coda are groups of consonants, and aren't required.



          Second, the maximal onset principle: we want the onset to be as long as possible. So "tube" is /tub/, but "tuba" is /tu.ba/: the /b/ goes with the second syllable, because that makes the onset bigger.



          Third, the syllable structure constraints: certain patterns of consonants aren't allowed together. This one varies by language, but in English, the onset can only be three consonants long at most, and you can't have a stop followed by a fricative in the onset, among many others. So "axle" is /ak.səl/ instead of */a.ksəl/, despite the maximal onset principle. Wikipedia has a good list of these constrains.



          So if you want an algorithm for doing this:



          • Locate all the nuclei (vowels)

          • For each nucleus, work backward, adding sounds to the onset

          • If the onset stops being valid, take a step back, then put all the rest of the sounds in the previous syllable's coda


          (*) Some analyses of English have syllabic resonants, while others treat them as /ə/ plus resonant. In this answer I'm assuming you're using the version with schwa.






          share|improve this answer























          • What a fantastic answer. You're right, I'm trying to programatically translate a word or phrase into Aig, aka Aigy-Paigy. WordsApi provides the syllables and the IPA for a given word. I'm now considering where to insert eɪg. It might take me a while to decode and then code what you've provided but you've given me lots to go on. Thank you.

            – skedly
            1 hour ago












          • @skedly You're in luck in that case! That's even easier: find all the vowels (you can identify them on an IPA chart), then insert eɪg before each one. The only trick is figuring out whether two vowels in a row are a diphthong (should be treated as one vowel) or hiatus (should go in separate syllables). But there are only a handful of diphthongs in English, so you can just look those up in a table.

            – Draconis
            55 mins ago















          3














          This is, in fact, possible! It's not trivial, but it is straightforward.



          Your goal seems to be to break an English word (written in phonemic IPA) into syllables. There's a bit of controversy about how useful the concept of a "syllable" is in English, and a few different theories about what exactly a "syllable" is if it does exist, but the following is pretty widely accepted and should be good for your purpose.



          First, the theory of syllable structure: every syllable looks something like ONC, where O is the onset, N is the nucleus, and C is the coda. The nucleus is a vowel(*), and always has to be there; the onset and coda are groups of consonants, and aren't required.



          Second, the maximal onset principle: we want the onset to be as long as possible. So "tube" is /tub/, but "tuba" is /tu.ba/: the /b/ goes with the second syllable, because that makes the onset bigger.



          Third, the syllable structure constraints: certain patterns of consonants aren't allowed together. This one varies by language, but in English, the onset can only be three consonants long at most, and you can't have a stop followed by a fricative in the onset, among many others. So "axle" is /ak.səl/ instead of */a.ksəl/, despite the maximal onset principle. Wikipedia has a good list of these constrains.



          So if you want an algorithm for doing this:



          • Locate all the nuclei (vowels)

          • For each nucleus, work backward, adding sounds to the onset

          • If the onset stops being valid, take a step back, then put all the rest of the sounds in the previous syllable's coda


          (*) Some analyses of English have syllabic resonants, while others treat them as /ə/ plus resonant. In this answer I'm assuming you're using the version with schwa.






          share|improve this answer























          • What a fantastic answer. You're right, I'm trying to programatically translate a word or phrase into Aig, aka Aigy-Paigy. WordsApi provides the syllables and the IPA for a given word. I'm now considering where to insert eɪg. It might take me a while to decode and then code what you've provided but you've given me lots to go on. Thank you.

            – skedly
            1 hour ago












          • @skedly You're in luck in that case! That's even easier: find all the vowels (you can identify them on an IPA chart), then insert eɪg before each one. The only trick is figuring out whether two vowels in a row are a diphthong (should be treated as one vowel) or hiatus (should go in separate syllables). But there are only a handful of diphthongs in English, so you can just look those up in a table.

            – Draconis
            55 mins ago













          3












          3








          3







          This is, in fact, possible! It's not trivial, but it is straightforward.



          Your goal seems to be to break an English word (written in phonemic IPA) into syllables. There's a bit of controversy about how useful the concept of a "syllable" is in English, and a few different theories about what exactly a "syllable" is if it does exist, but the following is pretty widely accepted and should be good for your purpose.



          First, the theory of syllable structure: every syllable looks something like ONC, where O is the onset, N is the nucleus, and C is the coda. The nucleus is a vowel(*), and always has to be there; the onset and coda are groups of consonants, and aren't required.



          Second, the maximal onset principle: we want the onset to be as long as possible. So "tube" is /tub/, but "tuba" is /tu.ba/: the /b/ goes with the second syllable, because that makes the onset bigger.



          Third, the syllable structure constraints: certain patterns of consonants aren't allowed together. This one varies by language, but in English, the onset can only be three consonants long at most, and you can't have a stop followed by a fricative in the onset, among many others. So "axle" is /ak.səl/ instead of */a.ksəl/, despite the maximal onset principle. Wikipedia has a good list of these constrains.



          So if you want an algorithm for doing this:



          • Locate all the nuclei (vowels)

          • For each nucleus, work backward, adding sounds to the onset

          • If the onset stops being valid, take a step back, then put all the rest of the sounds in the previous syllable's coda


          (*) Some analyses of English have syllabic resonants, while others treat them as /ə/ plus resonant. In this answer I'm assuming you're using the version with schwa.






          share|improve this answer













          This is, in fact, possible! It's not trivial, but it is straightforward.



          Your goal seems to be to break an English word (written in phonemic IPA) into syllables. There's a bit of controversy about how useful the concept of a "syllable" is in English, and a few different theories about what exactly a "syllable" is if it does exist, but the following is pretty widely accepted and should be good for your purpose.



          First, the theory of syllable structure: every syllable looks something like ONC, where O is the onset, N is the nucleus, and C is the coda. The nucleus is a vowel(*), and always has to be there; the onset and coda are groups of consonants, and aren't required.



          Second, the maximal onset principle: we want the onset to be as long as possible. So "tube" is /tub/, but "tuba" is /tu.ba/: the /b/ goes with the second syllable, because that makes the onset bigger.



          Third, the syllable structure constraints: certain patterns of consonants aren't allowed together. This one varies by language, but in English, the onset can only be three consonants long at most, and you can't have a stop followed by a fricative in the onset, among many others. So "axle" is /ak.səl/ instead of */a.ksəl/, despite the maximal onset principle. Wikipedia has a good list of these constrains.



          So if you want an algorithm for doing this:



          • Locate all the nuclei (vowels)

          • For each nucleus, work backward, adding sounds to the onset

          • If the onset stops being valid, take a step back, then put all the rest of the sounds in the previous syllable's coda


          (*) Some analyses of English have syllabic resonants, while others treat them as /ə/ plus resonant. In this answer I'm assuming you're using the version with schwa.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered 1 hour ago









          DraconisDraconis

          12.2k11952




          12.2k11952












          • What a fantastic answer. You're right, I'm trying to programatically translate a word or phrase into Aig, aka Aigy-Paigy. WordsApi provides the syllables and the IPA for a given word. I'm now considering where to insert eɪg. It might take me a while to decode and then code what you've provided but you've given me lots to go on. Thank you.

            – skedly
            1 hour ago












          • @skedly You're in luck in that case! That's even easier: find all the vowels (you can identify them on an IPA chart), then insert eɪg before each one. The only trick is figuring out whether two vowels in a row are a diphthong (should be treated as one vowel) or hiatus (should go in separate syllables). But there are only a handful of diphthongs in English, so you can just look those up in a table.

            – Draconis
            55 mins ago

















          • What a fantastic answer. You're right, I'm trying to programatically translate a word or phrase into Aig, aka Aigy-Paigy. WordsApi provides the syllables and the IPA for a given word. I'm now considering where to insert eɪg. It might take me a while to decode and then code what you've provided but you've given me lots to go on. Thank you.

            – skedly
            1 hour ago












          • @skedly You're in luck in that case! That's even easier: find all the vowels (you can identify them on an IPA chart), then insert eɪg before each one. The only trick is figuring out whether two vowels in a row are a diphthong (should be treated as one vowel) or hiatus (should go in separate syllables). But there are only a handful of diphthongs in English, so you can just look those up in a table.

            – Draconis
            55 mins ago
















          What a fantastic answer. You're right, I'm trying to programatically translate a word or phrase into Aig, aka Aigy-Paigy. WordsApi provides the syllables and the IPA for a given word. I'm now considering where to insert eɪg. It might take me a while to decode and then code what you've provided but you've given me lots to go on. Thank you.

          – skedly
          1 hour ago






          What a fantastic answer. You're right, I'm trying to programatically translate a word or phrase into Aig, aka Aigy-Paigy. WordsApi provides the syllables and the IPA for a given word. I'm now considering where to insert eɪg. It might take me a while to decode and then code what you've provided but you've given me lots to go on. Thank you.

          – skedly
          1 hour ago














          @skedly You're in luck in that case! That's even easier: find all the vowels (you can identify them on an IPA chart), then insert eɪg before each one. The only trick is figuring out whether two vowels in a row are a diphthong (should be treated as one vowel) or hiatus (should go in separate syllables). But there are only a handful of diphthongs in English, so you can just look those up in a table.

          – Draconis
          55 mins ago





          @skedly You're in luck in that case! That's even easier: find all the vowels (you can identify them on an IPA chart), then insert eɪg before each one. The only trick is figuring out whether two vowels in a row are a diphthong (should be treated as one vowel) or hiatus (should go in separate syllables). But there are only a handful of diphthongs in English, so you can just look those up in a table.

          – Draconis
          55 mins ago










          skedly is a new contributor. Be nice, and check out our Code of Conduct.









          draft saved

          draft discarded


















          skedly is a new contributor. Be nice, and check out our Code of Conduct.












          skedly is a new contributor. Be nice, and check out our Code of Conduct.











          skedly is a new contributor. Be nice, and check out our Code of Conduct.














          Thanks for contributing an answer to Linguistics Stack Exchange!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid


          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.

          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function ()
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2flinguistics.stackexchange.com%2fquestions%2f30933%2fhow-to-detect-sounds-in-ipa-spelling%23new-answer', 'question_page');

          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          Oświęcim Innehåll Historia | Källor | Externa länkar | Navigeringsmeny50°2′18″N 19°13′17″Ö / 50.03833°N 19.22139°Ö / 50.03833; 19.2213950°2′18″N 19°13′17″Ö / 50.03833°N 19.22139°Ö / 50.03833; 19.221393089658Nordisk familjebok, AuschwitzInsidan tro och existensJewish Community i OświęcimAuschwitz Jewish Center: MuseumAuschwitz Jewish Center

          Valle di Casies Indice Geografia fisica | Origini del nome | Storia | Società | Amministrazione | Sport | Note | Bibliografia | Voci correlate | Altri progetti | Collegamenti esterni | Menu di navigazione46°46′N 12°11′E / 46.766667°N 12.183333°E46.766667; 12.183333 (Valle di Casies)46°46′N 12°11′E / 46.766667°N 12.183333°E46.766667; 12.183333 (Valle di Casies)Sito istituzionaleAstat Censimento della popolazione 2011 - Determinazione della consistenza dei tre gruppi linguistici della Provincia Autonoma di Bolzano-Alto Adige - giugno 2012Numeri e fattiValle di CasiesDato IstatTabella dei gradi/giorno dei Comuni italiani raggruppati per Regione e Provincia26 agosto 1993, n. 412Heraldry of the World: GsiesStatistiche I.StatValCasies.comWikimedia CommonsWikimedia CommonsValle di CasiesSito ufficialeValle di CasiesMM14870458910042978-6

          Typsetting diagram chases (with TikZ?) Announcing the arrival of Valued Associate #679: Cesar Manara Planned maintenance scheduled April 17/18, 2019 at 00:00UTC (8:00pm US/Eastern)How to define the default vertical distance between nodes?Draw edge on arcNumerical conditional within tikz keys?TikZ: Drawing an arc from an intersection to an intersectionDrawing rectilinear curves in Tikz, aka an Etch-a-Sketch drawingLine up nested tikz enviroments or how to get rid of themHow to place nodes in an absolute coordinate system in tikzCommutative diagram with curve connecting between nodesTikz with standalone: pinning tikz coordinates to page cmDrawing a Decision Diagram with Tikz and layout manager